top of page

Load data for .30 Super Fl. H&H + .308 | 150gr | Impala LWH CHP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 Super Fl. H&H + .308 | 150gr | Impala LWH CHP

Load Specifications

Bullet:
.308 | 150gr | Impala LWH CHP
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.211" | 30.8mm
Caliber:
.30 Super Fl. H&H
Case Length (l3):
2.940" | 74.7mm
Cartridge Length (C.O.L.):
3.635" | 92.3mm
Seated Depth:
0.516" | 13.1mm
Shank Seated Depth:
0.516" | 13.1mm
Case Capacity:
94.0 Grains of Water | 6.10 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B2987_C315

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 58 loads in caliber .30 Super Fl. H&H with .308 | 150gr | Impala LWH CHP bullet and 29 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2209]*
<<locked>>
88%
41727
90%
**51
93%
Accurate 3100
<<locked>>
92%
41365
89%
**25
96%
Alliant Reloder-16
<<locked>>
84%
41640
90%
**97
98%
[Alliant Reloder-19]*
<<locked>>
88%
41394
89%
**51
93%
[Alliant Reloder-22]*
<<locked>>
92%
41742
90%
**00
93%
Alliant Reloder-23 👍
<<locked>>
94%
41220
89%
**04
99%
Alliant Reloder-25
<<locked>>
97%
39958
86%
**87
96%
Alliant Reloder-26
<<locked>>
91%
41292
89%
**63
98%
[Hodgdon H4350]*
<<locked>>
85%
41568
90%
**95
94%
Hodgdon Hybrid 100V
<<locked>>
86%
41481
89%
**28
99%
Hodgdon TrailBoss
<<locked>>
96%
34664
75%
**06
100%
[IMR 4350]*
<<locked>>
83%
41553
90%
**95
94%
IMR 4831
<<locked>>
87%
41394
89%
**38
98%
Lovex S071
<<locked>>
97%
40828
88%
**08
96%
[Norma 204]*
<<locked>>
84%
41336
89%
**28
92%
Norma MRP
<<locked>>
91%
41466
89%
**27
95%
Norma URP
<<locked>>
83%
41626
90%
**58
98%
Ramshot Hunter
<<locked>>
84%
41408
89%
**58
96%
[Ramshot Magnum]*
<<locked>>
93%
41336
89%
**58
93%
ReloadSwiss RS 14
<<locked>>
96%
35360
76%
**49
100%
ReloadSwiss RS 62
<<locked>>
83%
41452
89%
**77
98%
ReloadSwiss RS 70
<<locked>>
84%
41727
90%
**07
97%
[ReloadSwiss RS 76]*
<<locked>>
97%
39044
84%
**74
93%
[Rottweil R 905]*
<<locked>>
89%
41466
89%
**48
93%
Somchem S365
<<locked>>
86%
41640
90%
**97
100%
[Somchem S385]*
<<locked>>
88%
41466
89%
**18
94%
[Vihtavuori N165]*
<<locked>>
94%
41582
90%
**15
94%
Vihtavuori N555 👍
<<locked>>
90%
41582
90%
**97
98%
Winchester StaBALL HD 👍
<<locked>>
97%
39030
84%
**25
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2209]*
<<locked>>
84%
36434
78%
**17
90%
[Accurate 3100]*
<<locked>>
81%
29109
63%
**03
90%
Alliant Reloder-16
<<locked>>
81%
37565
81%
**95
97%
[Alliant Reloder-19]*
<<locked>>
84%
36201
78%
**20
90%
[Alliant Reloder-22]*
<<locked>>
88%
35926
77%
**53
90%
[Alliant Reloder-23]*
<<locked>>
81%
28108
61%
**33
94%
[Alliant Reloder-25]*
<<locked>>
87%
29515
64%
**72
90%
[Alliant Reloder-26]*
<<locked>>
81%
29950
65%
**38
92%
[Hodgdon H4350]*
<<locked>>
81%
36695
79%
**84
92%
Hodgdon Hybrid 100V
<<locked>>
81%
35288
76%
**87
98%
Hodgdon TrailBoss
<<locked>>
81%
27746
60%
**49
100%
[IMR 4350]*
<<locked>>
81%
38392
83%
**20
93%
IMR 4831
<<locked>>
81%
34127
74%
**61
96%
[Lovex S071]*
<<locked>>
85%
28413
61%
**84
90%
[Norma 204]*
<<locked>>
81%
37985
82%
**49
91%
[Norma MRP]*
<<locked>>
83%
32561
70%
**84
90%
Norma URP
<<locked>>
81%
38406
83%
**76
97%
[Ramshot Hunter]*
<<locked>>
81%
37362
80%
**59
94%
[Ramshot Magnum]*
<<locked>>
89%
35143
76%
**07
90%
ReloadSwiss RS 14
<<locked>>
81%
28369
61%
**91
100%
ReloadSwiss RS 62
<<locked>>
81%
38348
83%
**95
96%
ReloadSwiss RS 70
<<locked>>
81%
37492
81%
**08
96%
[ReloadSwiss RS 76]*
<<locked>>
94%
35505
77%
**76
91%
[Rottweil R 905]*
<<locked>>
84%
35070
76%
**90
90%
Somchem S365
<<locked>>
81%
35128
76%
**43
99%
[Somchem S385]*
<<locked>>
81%
32721
71%
**02
90%
[Vihtavuori N165]*
<<locked>>
87%
33794
73%
**21
90%
Vihtavuori N555
<<locked>>
81%
30995
67%
**21
95%
[Winchester StaBALL HD]*
<<locked>>
81%
25237
54%
**84
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page